Colour:
anthracite powder coated
Version:
Individual room ventilation system , PushPull Balanced PPB 30, metal cover
RRP:
€
1,725.46
*
This special offer ends today!
This special offer ends in days!
You save on RRP:
€ 577.49
approx. 1-2 weeks
€ 1,147.97
All prices include VAT 21%., plus shipping
Shipped via courier only € 6.95 (promotion until 03.06.24)
Item Number:
0093.1655
Brand:
MAICO
Series:
PPB
Dimensions:
W: 27.5 D: 41 H: 27.5 cm
Colour:
anthracite powder coated
Version:
Individual room ventilation system , PushPull Balanced PPB 30, metal cover
Contact our qualified consultant.
+49 2237 / 6556-0
Monday - Friday: 8:00 am - 8:00 pm
Saturday 9:00 am - 8:00 pm
Monday - Friday: 8:00 am - 8:00 pm
Saturday 9:00 am - 8:00 pm
Itemdetails
MAICO PPB 30K comfort ventilation regenerative complete set, radio controlled
'consisting of:
Features radio switch::16 D:26 to 50 H:16 cm
Plastic shell sleeve DN 160 incl. Mounting material
Length = 500 mm
Features exterior cover::25.3 D:6.7 H:25.8 cm
Exterior cover made of powder-coated aluminum
Louvers of the grille are flow-optimized to minimize air turbulence and keep exhaust air away from the exterior wall
Discoloration and dirt deposits on the exterior facade are thus significantly minimized.
Installation note: Installation must be carried out by a registered specialist company.
- Single room ventilation unit (radio version)
- Radio switch
- Shell sleeve
- External cover made of powder-coated aluminum
- Single room ventilation unit with heat recovery consisting of 2 fans, 2 ceramic heat exchangers, 2 G3 filters, an internal cover and an integrated humidity sensor
- Radio version: Control via radio switch DS 45 RC
- primarily designed for installation in exhaust air rooms
- IPX 4 protection
- High-performance heat exchanger with highly efficient EC fans
- Heat recovery efficiency of 73 ei Reference volume flow according to EN 13141-8
- Unit is supplied assembled ready for operation and connected directly to 230 V
- Control via radio switch DS 45 RC
- Installation in 2 steps: Installation of the shell sleeve as well as an external cover in a core hole bore DN 160 with an inclination of 1-2%
- Recommendation: Execute core hole bore in DN 182 and align the inclination of the sleeve by means of enclosed polystyrene wedges
- Shell sleeve is protected against contamination by means of protective plaster covers
- This is followed by integration of the final assembly set
- No pipe laying necessary and no adjustment of the system required
- Condensate is discharged via an integrated condensate drip edge in the outer cover
- Test report according to EN 13141-8.
- Entry in TZWL Bulletin.
- W:8 D:1.5 H:8 cm
- 3 operating modes: continuous ventilation, cross ventilation and auto operation
- Continuous ventilation with heat recovery: PushPull operation. The unit runs alternately and changes the running direction every 60 s
- Cross ventilation (without heat recovery): Unit is permanently in supply or exhaust air mode
- Automatic mode, the delivery volume is continuously adjusted to the sensor value (HYI)
- Time-limited intensive ventilation (shock ventilation) or time-limited shutdown can also be selected by pressing a button
- 5 ventilation levels: 5, 12, 18, 22 and 26 m³/h
- the radio switch does not require a battery
- the radio switch can be screwed on or glued to glass surfaces
- W
Plastic shell sleeve DN 160 incl. Mounting material
Length = 500 mm
- W
Exterior cover made of powder-coated aluminum
Louvers of the grille are flow-optimized to minimize air turbulence and keep exhaust air away from the exterior wall
Discoloration and dirt deposits on the exterior facade are thus significantly minimized.
Installation note: Installation must be carried out by a registered specialist company.
Downloads & Additional information
Our Recommendations
Matching Accessories
Our Recommendations
All prices include VAT 21%. , plus shipping