Kaldewei installation system frame ESR floor level 90 x 140 cm

Properties:

• For the simple and safe installation of rectangular Kaldewei shower surfaces at floor level
• Pre-assembled aluminium frame in the right size for the shower surface
• High level of protection against moisture penetration thanks to integrated sealing system incl. water leakage connection Creeping water connection
• 3D Flex foot system adapts to the conditions on site
• Noise insulation thanks to integrated sound insulation strip, rubber surround profiles, corner support rubbers and sound-decoupled feet
• Dimensions of the shower tray: 90 x 140 cm
• Dimensions ESR flush with the floor: 92.8 x 142.8 cm
• Number of foot units: 6

Scope of delivery:

Sealing setfloor-level ESR with sealing tape, 2 wall corners, 4 multifunctional corners
Butyl sealing tape for internal sealing
Pre-assembled sound insulation tape on the frame
3D-Flex feet (height adjustment 4.9 - 16.4 cm) with floor fastening
Hexagon spanner for height adjustment feet
Shuttering aids/plates for creating screed recesses
Tile laying aid

Notes:
We recommend using Kaldewei assembly adhesive to fix the sealing elements.
If required, please also order the extension set for the foot units.
The drain set KA 90/KA 120 with drainage water connection (depending on the shower tray) is still required.
From a side length of 90 cm or more, a centre support MAS (depending on the shower tray model) is required.
Suggestions can be found in the accessories, but may need to be adapted to the shower tray.