Version:
Single venting system, standard
RRP:
€
578.38
*
This special offer ends today!
This special offer ends in days!
You save on RRP:
€ 247.93
approx. 1 week
€ 330.45
All prices include VAT 21%., plus shipping
Shipped via courier
Item Number:
0093.1638
Brand:
MAICO
Series:
ER
Dimensions:
W: 25 D: 25 H: 15 cm
Colour:
white
Version:
Single venting system, standard
Contact our qualified consultant.
+49 2237 / 6556-0
Monday - Friday: 8:00 am - 8:00 pm
Saturday 9:00 am - 8:00 pm
Monday - Friday: 8:00 am - 8:00 pm
Saturday 9:00 am - 8:00 pm
Itemdetails
MAICO venting set standard windowless bath ES FB
consisting of:
Installation note: Installation must be carried out by a registered specialist company.
- Fan insert
- Flush-mounted housing incl. mounting bracket
- Cover - standard version
- 2-stage fan for installation in flush-mounted housing ER GH
- delivery volume 30 m³/h / 60 m³/h in combination with standard cover ER-A
- robust, constant volume current, energy-saving and sound-optimized EC motor
- lowest power consumption
- ventilation solution according to DIN 18017-3 (single-pipe ventilation)
- protection class IP X5, installation in protection zone 1 possible.
- the fan insert ER EC can be combined with the four existing covers ER-A, ER-AK, ER-AH, ER-AB and adapted to the application situation
- when using the covers (ER-AK, ER-AH, ER-AB) also 20 / 30 / 40 / 60 / 100 m³/h possible
- switch-on delay 60 s
- run-on time 15 min
- for single or double room ventilation with a single fan
- accessories for double room ventilation ER-ZR
- simple and quick installation of the fan in the housing via the snap-on mounting and the electrical plug connection.
- all MAICO ER units comply with protection class IP X5 and can thus be installed in area 1 according to DIN VDE 0100-701, even in case of water jets protection class II
- the steep characteristic curve shows the high pressure capacity of the ER EC fan
- robust energy-saving EC motor with thermal overload protection
- maintenance-free, with ball bearings closed on both sides
- plastic discharge connection piece that can be converted without tools with automatic plastic non-return flap for discharge direction to the side (top, left, right) and rear
- lateral mounting grooves for installation with mounting brackets or in pre-wall installations
- automatic plastic non-return flap with the simultaneous function as a cold smoke barrier
- for applications in accordance with DIN 18017-3
- single room ventilation, installation in bathrooms, WCs and residential kitchens
- Predetermined breaking point for second room connection or WC connection pipe as standard in ER GH-Housing available as standard
- Installation possible inside and outside of shaft in wall and ceiling
- Low installation depth of flush-mounted housing and cover
- Circumferential frame enables additional mounting option
- Flexible cable entry enables electrical connection from side or rear
- Connection diameter DN 75/80
- Plastic parts normally flammable to DIN 4102-1 Class B 2 (to EN 13501-1)
- Mounting bracket for installation of ER-GH and ER-UP flush-mounted housings on walls, ceilings or in shafts
- with slotted holes for exact adjustment of fan housings
- Packaging unit: 2 L-shaped angle plates, 4 mounting screws
- Flow-optimized, attractive design
- Standard cover for ER EC with filter change indicator (Timestrip)
- Base load 30 m³/h / Full load 60 m³/h.
- On/Off of full load stage via light switch or separate switch
- Switching to full load stage (60 m³/h) with switch-on delay of approx. 60 s
- Follow-up time of full load approx. 15 min
- Filter change indicator, can be changed without tools
- Unit can be operated continuously in the basic load stage
- Protection class IP X5 for safety in the bathroom
- for single room ventilation with a single fan
- Filter G2 (IsoCoarse 30 %)
- Cover can be rotated by ± 5°, thus compensation possible if housing is installed at an angle
- Cannot be speed-controlled
- Circuit variant: with an additional switch, the basic load can be switched on or off. switched off
Installation note: Installation must be carried out by a registered specialist company.
Downloads & Additional information
Our Recommendations
Matching Accessories
MAICO ventilator cover comfort ER-AK for ventilator insert ER-EC
approx. 2-3 weeks
€
136.73
*
€ 89.47
Our Recommendations
All prices include VAT 21%. , plus shipping