Schell XERIS Electronic Washbasin Faucet E HD-K large

Infrared sensor controlled. Mains operation (plug-in power supply). Suitable for networking with SCHELL water management system SWS. Can be parameterized via SCHELL Single Control SSC.

Features:

• High pressure cold water / pre-mixed water
• Infrared sensor single hole fitting
• Infrared sensor electronics, programmable
• Axial solenoid valve 6 V with pre-filter
• Aerator
• Connection cable 35 cm, with plug connector 3-pole, protection class IP 65
• Plug-in power supply 9 VDC, 100 - 240 VAC, 50 - 60 Hz
• Flexible connection hose Clean-Fix S G 3/8 IG x 50 cm, with integrated backflow preventer (RV, EN 1717: EB) and pre-filter
• Mounting material for washbasin installation

• Setting options via SWS/SSC
• Programming via Nahreflex (off / on)
• Sensor range (short / medium / long)
• max. Running time (1 - 360 s)
• Follow-up time (0.6 - 60 s)
• Stagnation flush (Off / 5 - 600 s, every 1 - 240 h after last flush / every 1 - 240 h)
• Continuous flush for thermal disinfection, with scald protection (Off / 15 - 600 s)
• Continuous flow (Off / 15 - 600 s)
• Energy-saving mode (Off / 1 - 254 h after last use)
• Cleaning stop (Off / 60 - 360 s)
• Setting options via Nahreflex
• Sensor range (short / medium / long)
• Stagnation flush (Off / 30 s, every 24 h after last flush / every 24 h)
• Continuous flush for thermal disinfection, with scald protection (Off / 300 s / 120 s)
• Cleaning stop (Off / 60 s)
• Flow: max. 5 l/min pressure-independent
• Flow pressure: 1 - 5 bar
• max. Resting pressure: 8 bar
• max. Operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: housing brass; water-carrying parts plastic
• Surface: chrome
• Projection: 17,9 cm
• Connection: G 3/8 IG
• Certificates: P-IX 29072/IO, ACS, Belgaqua, WELL public
• Noise class: I
• Flow class: O