Duravit No. 1 trapezoid whirlpool bath Jet Project 150 x 80 cm with 1 back slope right
Dimensions:
L: 150 W: 80 H: 46 cm
Version:
Whirlpool tub with 1 back slope right
RRP:
€
3,845.38
*
This special offer ends today!
This special offer ends in days!
You save on RRP:
€ 1,426.40
approx. 2-3 weeks
€ 2,418.98
All prices include VAT 21%., plus shipping
Shipped via freight courier
Item Number:
760505000JP1000
Brand:
Duravit
Series:
Duravit No. 1
Dimensions:
L: 150 W: 80 H: 46 cm
Colour:
white
Version:
Whirlpool tub with 1 back slope right
Contact our qualified consultant.
+49 2237 / 6556-0
Monday - Friday: 8:00 am - 8:00 pm
Saturday 9:00 am - 8:00 pm
Monday - Friday: 8:00 am - 8:00 pm
Saturday 9:00 am - 8:00 pm
Itemdetails
Duravit No. 1 trapezoid whirlpool bath Jet Project 150 x 80 cm with 1 back slope right
Features:
If required, the installation of a Duravit tub handle for safe entry and exit is possible, please order separately (installation only possible ex works).
An intrinsically safe fitting according to DIN EN1717 or a pipe interrupter is required.
The connection hose Art. 790159 is recommended for installation.
Install the whirlpool tub so that all important units (pump, blower and control) remain accessible.
For easy revision, installation with a removable furniture cover is recommended.
- with whirlpool system Jet Project
- built-in version
- with a back slope on the right
- drain and overflow in the middle
- drain diameter 5.2 cm
- total height to lower edge of drain: 48 cm
- usable capacity approx. 115 L
- length inside dimension: 91.5 cm
- made of sanitary acrylic - drawn and dyed through, impact and shock resistant plastic with pleasantly warm and smooth as well as pore-free surface
- 6 adjustable side jets that create a soothing massage effect
- the intensity of the massage jet is controlled by the air admixture
- with control unit side jets with air regulator
- incl. residual water drain,
- with base
- with drain and overflow set chrome-plated
- with dry run protection
- Power supply: 220-240V, 50 Hz
If required, the installation of a Duravit tub handle for safe entry and exit is possible, please order separately (installation only possible ex works).
An intrinsically safe fitting according to DIN EN1717 or a pipe interrupter is required.
The connection hose Art. 790159 is recommended for installation.
Install the whirlpool tub so that all important units (pump, blower and control) remain accessible.
For easy revision, installation with a removable furniture cover is recommended.
Downloads & Additional information
Our Recommendations
Matching Accessories
10% discount!
10% discount!
Topseller
Topseller
Our Recommendations
All prices include VAT 21%. , plus shipping
